Towertalk
[Top] [All Lists]

Re: [TowerTalk] tower removal question

To: towertalk@contesting.com
Subject: Re: [TowerTalk] tower removal question
From: Mac <libbysales@austin.rr.com>
Date: Mon, 6 May 2019 21:19:14 -0500
List-post: <mailto:towertalk@contesting.com>
I'd walk away from it and never look back, it has a limited value and will require a maximum effort as well same or near cost to rent and gather equipment. On second thought ?  I'd run from this deal as we are calling it.

But we will support your effort however you go ..

best:  mac/mc  w5mc

On 5/5/2019 4:36 PM, Tom WA9WSJ via TowerTalk wrote:
Hello Oh Wise Gents!
I have the opportunity to obtain a 40, (38), foot Rohn 25G for free. But I will 
have to take it down. I have no idea how long it's been in the air but I would 
guess many years.
The bottom section has TWO splits, one per leg, where it must have frozen and 
ruptured, so no climbing it. I'm considering a rented man lift to take each 
section off.
So my question is "generally speaking", how difficult is it to separate the 
sections? Considering that I'll use a gin pole and a tower jack installation/removal tool.
The antenna that is up there is what looks to be a VHF commercial ground plane, 
so no real weight was up there.
I know this is a leading question, but I'd like a little insight as to what I'm 
up against.
What tricks does the experienced guys here have to suggest?
Thanks much!!!
Tom

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>