With the cost of the lift and the time involved to remove and transport, and
you'll only end up with 3 usable sections, providing the others aren't damaged.
Is it worth it.
Just my opinion.
Skip Bolnick, KJ6YCommunications Service Cowww.kj6y.com818-522-5421
In a message dated 5/5/2019 2:37:33 PM Pacific Standard Time,
towertalk@contesting.com writes:
Hello Oh Wise Gents!I have the opportunity to obtain a 40, (38), foot Rohn 25G
for free. But I will have to take it down. I have no idea how long it's been in
the air but I would guess many years.The bottom section has TWO splits, one per
leg, where it must have frozen and ruptured, so no climbing it. I'm considering
a rented man lift to take each section off.So my question is "generally
speaking", how difficult is it to separate the sections? Considering that I'll
use a gin pole and a tower jack installation/removal tool.The antenna that is
up there is what looks to be a VHF commercial ground plane, so no real weight
was up there.
I know this is a leading question, but I'd like a little insight as to what I'm
up against.What tricks does the experienced guys here have to suggest?Thanks
much!!!Tom
_______________________________________________
_______________________________________________TowerTalk mailing
listTowerTalk@contesting.comhttp://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|