Towertalk
[Top] [All Lists]

Re: [TowerTalk] how to do coax on ring rotor?

To: "'StellarCAT'" <rxdesign@ssvecnet.com>, "'tower'" <towertalk@contesting.com>
Subject: Re: [TowerTalk] how to do coax on ring rotor?
From: "Tim Duffy" <k3lr@k3lr.com>
Date: Sun, 24 Mar 2019 12:27:54 -0400
List-post: <mailto:towertalk@contesting.com>
Hello Gary:

You can go to my website and see lots of photos of coax with ring rotors. There 
are 23 ring rotors here - so if you have questions after looking at the photos 
and videos - please email me and I will help

http://www.k3lr.com  look at contest photos and videos

73
Tim K3LR

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of 
StellarCAT
Sent: Sunday, March 24, 2019 12:00 PM
To: tower
Subject: [TowerTalk] how to do coax on ring rotor?

I’ve got two TIC ring rotors that are going up – hopefully this spring ... 
they’ll have 2 7 element 10’s on them ... (yeah, I know, 10M’s).... and I’m 
trying to figure out the best way to handle the coax coming off of the 
antennas. Both going up from the ring as well as going down. I need up because 
one of the rings will be mounted 4’ above a guy point so going down isn’t 
likely to be a solution. 

Anyone done this already and gone through the trials and tribulations of 
getting it right?

You’re welcome to write direct to my ARRL email address or post here... 

thanks – Gary, K9RX
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>