Towertalk
[Top] [All Lists]

Re: [TowerTalk] Guy Anchor Question

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] Guy Anchor Question
From: <john@kk9a.com>
Date: Tue, 18 Sep 2018 20:08:19 -0400
List-post: <mailto:towertalk@contesting.com>
I think you're guying a military mast.  I would not unscrew the earth
anchor.  You could add shackles to the two turnbuckles that are short.

John KK9A


Ed N3CW wrote:


I have one set of guys on my 60 ft tower where the two turnbuckles for the
mid 
and top guys are about at their maximum limit. There is maybe an inch of
thread 
left to make adjustments on each of the rods. I really need to let out a bit

more and tighten up the other two sets of guys to get the tower perfectly 
vertical.  

How far out can one safely open up the turnbuckle adjustments?

Of course I can re-install a couple new guy grips a bit farther out on the
EHS, 
and that would allow me to close up the turnbuckles, but I'm investigating 
another option.  Anyone see any problem with turning out the screw-in guy 
anchor on the affected set of guys perhaps one turn?  It's a five foot
anchor 
and it is in pretty far already (about 6 inches extending from the ground).

Just unscrewing the guy anchor one turn will probably give me the slack I
need 
in the one set of guys without having to open up the turnbuckle to where I
have 
almost no threads left in the adjusting rods.

--Ed-

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>