http://disti-assets.s3.amazonaws.com/cdmelectronics/files/datasheets/4697.pd
f
73
Peter
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Jim
Brown
Sent: Sonntag, 19. August 2018 20:16
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Rotor loop coax
On 8/19/2018 10:07 AM, Terry Brown wrote:
> Is RG 213 the best and most flexible coax to use
In general, RG-numbers are not a specification for coax. Rather, they
define little more than the characteristic impedance and approximate
physical size. This has been true for at least 50 years.
The only meaningful way to specify coax is with a reputable
manufacturer's part number and data sheet for it. I agree with others
that Davis BuryFlex is a good choice for this application.
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|