Towertalk
[Top] [All Lists]

Re: [TowerTalk] N connector, Re: UHF (PL259) soldered center

To: "Jim Thomson" <jim.thom@telus.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] N connector, Re: UHF (PL259) soldered center
From: "Jim W7RY" <jimw7ry@gmail.com>
Date: Wed, 27 Jun 2018 20:32:33 -0500
List-post: <mailto:towertalk@contesting.com>




Thanks
73
Jim W7RY

## This argument about the captivated pin vs non captivated pin has been going on for
decades now.
_______________Whatever....

## For amateur use, why mess with Type N connectors in the 1st place. The Type N is good up to about 12 ghz, which is the only thing going for it. 7-16 Dins are good up to 6 ghz..

____________Because most amateur antennas have UHF or N connectors.

## another new connector is the 4.1 - 9.5 connector. Good up to 14 ghz. Excellent pim.

## To further add to the confusion, at one time they also made a 12-32 connector..which was huge,
and no longer made.

## For amateur use, at any freq, the type N is dead last on any list. IMO, anything is better than a type N. A type N installed on .875 or bigger heliax is a joke. BNC sized pin on a large diameter copper tube.
_______________Use a lossy adapter then.


##  Type N has gone the way of the do-do bird..along with LC connectors.

______________Sure it has....


Jim  VE7RF
_________________ 73 Jim W7RY

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>