Date: Tue, 26 Jun 2018 19:00:35 -0500
From: "Jim W7RY" <jimw7ry@gmail.com>
To: <towertalk@contesting.com>, "Jeff Blaine"
<KeepWalking188@ac0c.com>
Subject: Re: [TowerTalk] N connector, Re: UHF (PL259) soldered center
<Don?t fret Jeff!
<I've worked with professional tower contractors that cant assemble or get an
<N connector right.
<BUT with the newer style of Andrew/Comscope series of N connectors with the
<captive pin, it's a bit easier now for LDF4 Heliax and FSJ4 (SuperFlex) not
<for RG8/RG213/LMR-400 etc.
<TTYL
<73
<Jim W7RY
## This argument about the captivated pin vs non captivated pin has been
going on for
decades now.
## For amateur use, why mess with Type N connectors in the 1st place. The
Type N is good
up to about 12 ghz, which is the only thing going for it. 7-16 Dins are
good up to 6 ghz..
## another new connector is the 4.1 - 9.5 connector. Good up to 14 ghz.
Excellent pim.
## To further add to the confusion, at one time they also made a 12-32
connector..which was huge,
and no longer made.
## For amateur use, at any freq, the type N is dead last on any list. IMO,
anything is better than a type N.
A type N installed on .875 or bigger heliax is a joke. BNC sized pin on a
large diameter copper tube.
## Type N has gone the way of the do-do bird..along with LC connectors.
Jim VE7RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|