Towertalk
[Top] [All Lists]

Re: [TowerTalk] connector for LDF5-50 (not the newer -50A version)

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] connector for LDF5-50 (not the newer -50A version)
From: "Jeff" <keepwalking188@ac0c.com>
Date: Fri, 27 Oct 2017 22:30:33 -0500
List-post: <mailto:towertalk@contesting.com>
I found some references to the non-A series by looking at connector box labeling.

For example the L5TNM-PS connector had the -50 part number listed. Searching again for box tabs on what looked to be newer boxes showed the same L5TNM-PS listed as "-50A only". I would guess that leaving the connector part number unchanged for a fundamentally incompatible coax set would create a massive mess for the installer base at the time.

So at this point I am guessing that dimensionally the -50 and the -50A are the same in that they can use the same connectors. The differences in the -50A and -50 probably reflects a material content or manufacturing method difference. Until I can dig up a datasheet for the -50, won't know for sure.

In any event I'm going to try as John is suggesting - to use one of the L5 series connectors marked for the -50A to see if it actually works.

73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie

-----Original Message----- From: john@kk9a.com
Sent: Friday, October 27, 2017 10:15 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] connector for LDF5-50 (not the newer -50A version)

I never heard of plain LDF5-50. If the cable is good and you cannot find any
information on it, why not try a LDF5-50A connector and see if it makes good
physical contact?

John KK9A


To: <towertalk@contesting.com>
Subject: [TowerTalk] connector for LDF5-50 (not the newer -50A
version)
From: "Jeff" <keepwalking188@ac0c.com>
Date: Fri, 27 Oct 2017 17:19:39 -0500


I have some LDF5-50 (not the newer -50A) and am trying to determine what
connector would fit that.

Everything I can find refers only to the -50A version and not the older -50
version.

I have used the AL5DF-PS on some AVA5-50 and it was really easy to put on.
I
was hoping that the LDF5-50, LDF5-50A and AVA5-50 were all dimensionally the

same and could use the same connectors but have no idea if that's the actual

case.

73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>