Towertalk
[Top] [All Lists]

Re: [TowerTalk] FW: Tower Grounds

To: "Tower Talk" <towertalk@contesting.com>
Subject: Re: [TowerTalk] FW: Tower Grounds
From: "Keith Dutson" <kdutson@sbcglobal.net>
Date: Tue, 17 Oct 2017 15:20:08 -0500
List-post: <mailto:towertalk@contesting.com>
Same here.  The lowest bolts are too far up the tower.  I want my ground to
connect to the bottom.

Keith NM5G

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Jim
Brown
Sent: Tuesday, October 17, 2017 10:59 AM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] FW: Tower Grounds

On 10/17/2017 7:31 AM, jimlux wrote:
> This brings up an interesting point, why is everybody talking about 
> making "clamps" of some sort to clamp onto a structure which has 
> bolted joints?

Not every tower is bolted to a base plate set in concrete. Many of us, me
included, bury 4 ft or so of the lower tower segment in the concrete base,
thus the need for clamps.

73, Jim K9YC

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>