Anything is possible, however, you will likely never be able to get the tower
straight because the “idiot” surely didn’t make each cut in exactly the same
place on the tower. By the way, it would have been faster and safer to remove
the bolts IMHO.
Chuck W5PR
Sent from Mail for Windows 10
From: Gary Johnson
Sent: Friday, June 16, 2017 1:38 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Rohn 25 question
I was given 6 sections of Rohn 25 that some idiot with a sawzall disassembled
by cutting off the ears that fit into the next section vs unbolting. Is it
possible to remove the bolted in ears and reassemble using a section of pipe
the correct diameter bolting it both above and below??
73
Gary J
N5BAA
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|