I had a local welding shop make mine, for an old Tri-Ex.
The shop used steel rod and welded each junction.
My understanding is that if there is a gap in a junction, lightning can arc
and cause problems.
I also suggest taking the bottom section of the tower to the welder, so
that the fit will be as close to perfect as possible.
73
Joe KA8WEP
On Thu, May 4, 2017 at 11:37 AM, Joe Partlow <joe.w6jwp@gmail.com> wrote:
> I need to pour a base for a TMM-433HD tower but first I need a rebar cage.
> Do it myself or hire someone and who would I hire?
>
> --
> - 73 -
> - Joe W6JWP
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|