Towertalk
[Top] [All Lists]

Re: [TowerTalk] digging radials

To: <w5prchuck@gmail.com>, "'Dick Green WC1M'" <wc1m73@gmail.com>, "'Herb Krumich'" <wa2fgk@yahoo.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] digging radials
From: "Bob Shohet, KQ2M" <kq2m@kq2m.com>
Date: Sun, 19 Mar 2017 18:34:15 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
What about laying the radials on the ground – and then covering with ~ 1 1/2” 
of top soil?  The New England weeds will quickly grow on top and then you can 
mow right over them.  In a few months you won’t even know that they were there.

73

Bob KQ2M

From: Dick Green WC1M 
Sent: Sunday, March 19, 2017 6:27 PM
To: w5prchuck@gmail.com ; 'Dick Green WC1M' ; 'Herb Krumich' ; 
towertalk@contesting.com 
Subject: Re: [TowerTalk] digging radials

Would love to rent one of those, but no known options for that here in rural 
west-central NH.

 

73, Dick WC1M

 

From: w5prchuck@gmail.com [mailto:w5prchuck@gmail.com] 
Sent: Sunday, March 19, 2017 6:21 PM
To: Dick Green WC1M <wc1m73@gmail.com>; 'Herb Krumich' <wa2fgk@yahoo.com>; 
towertalk@contesting.com
Subject: RE: [TowerTalk] digging radials

 

I have not used an edger, but I think it will be slow going especially if you 
try to go deep.  The manual says:

 

“NOTE: There are 5 cutting depth settings from approximately ground level to 
2.5” (63 mm) deep. Do not overload the edger capacity by attempting to edge too 
deep at too fast a rate. To edge at deeper settings, make multiple passes, 
first cutting at shallow depths.”

 

This would be a good way, but expensive to buy.  I think renting one might 
work: http://www.ebay.com/itm/like/142313439152?lpid=82 
<http://www.ebay.com/itm/like/142313439152?lpid=82&chn=ps&ul_noapp=true> 
&chn=ps&ul_noapp=true

 

Chuck W5PR

 

Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986>  for Windows 10

 

From: Dick Green WC1M <mailto:wc1m73@gmail.com> 
Sent: Sunday, March 19, 2017 3:58 PM
To: 'Herb Krumich' <mailto:wa2fgk@yahoo.com> ; towertalk@contesting.com 
<mailto:towertalk@contesting.com> 
Subject: Re: [TowerTalk] digging radials

 

Anybody tried one of these?

 

http://www.homedepot.com/p/Powermate-9-in-79cc-Gas-Walk-Behind-Edger-with-Curb-Hopping-Feature-PWLE0799/202817519

 

73, Dick WC1M

 

-----Original Message-----

From: Herb Krumich [mailto:wa2fgk@yahoo.com] 

Sent: Sunday, March 19, 2017 11:14 AM

To: towertalk@contesting.com <mailto:towertalk@contesting.com> 

Subject: [TowerTalk] digging radials

 

I got back to Home Depot and the edger is on sale for 54.00 Ryobi 
EdgerExpand-It Attachment9" Dual Serrated Blade101-823Adjusts from 1/2 inch to 
2 1/2 inches

 

Fits Toro Weed Wacker

73'sHerb K2LNS

 

 

_______________________________________________

 

 

 

_______________________________________________

TowerTalk mailing list

TowerTalk@contesting.com <mailto:TowerTalk@contesting.com> 

http://lists.contesting.com/mailman/listinfo/towertalk

 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>