Towertalk
[Top] [All Lists]

Re: [TowerTalk] torque arms or not?

To: <towertalk@contesting.com>, "john@kk9a.com" <john@kk9a.com>
Subject: Re: [TowerTalk] torque arms or not?
From: "J. Hunt via TowerTalk" <towertalk@contesting.com>
Reply-to: "J. Hunt" <ki5dq@yahoo.com>
Date: Mon, 9 Jan 2017 11:53:25 +0000 (UTC)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Typically twisting within any tower is deadly.  Once twisted to far, the tower 
will buckle and collapse.  
I inspect my towers for weld cracks and other anomalies annually.

A Torque Arm assembly is located 2/3rd up the main tower and reduces tower 
twist from an side mounted antenna array.
A Star Guy assembly is located at tower apex, twist movement - perhaps 1 degree.

The second tower only has Torque Arm assembly.


Thanks,
James
ki5dq

--------------------------------------------
On Sun, 1/8/17, john@kk9a.com <john@kk9a.com> wrote:

 Subject: Re: [TowerTalk] torque arms or not?
 To: towertalk@contesting.com
 Date: Sunday, January 8, 2017, 9:10 PM
 
 Actually torque arms do almost nothing to stop twisting, you really need to go 
with a 6-way guy.  For that kind of wind, you might need the solid leg Rohn 45 
and lots of guys.
 
 GL,
 John KK9A
 
 Subject:    [TowerTalk] torque arms or not?
 From:    DALE LONG <dale.long@prodigy.net>
 Reply-to:    DALE LONG <dale.long@prodigy.net>
 Date:    Sat, 7 Jan 2017 20:56:40 +0000 (UTC)
 
 This brings up a related question.  We lost a lot of towers in southern Haiti 
 during Hurricane Matthew. Most of them were newly built 100-120 ft Rohn 25 
 towers with adequate guying and torque brackets but not torque arms.
 Here is a question for the tower professional.  If you are not using a 
rotator, 
 but only some VHF antennas at the top, how important is it to add the torque
  arms. We use a baseplate with pier pin so we are allowing for some movement
 at  the base.
 Our tower in Dame Marie was hit by 145 mph blunt force winds and I dont know
 if  anything would have survived.  But several towers folded over, with the 
guy 
 anchors and guy wires intact. We are thinking that we need to move up from
 Rohn  25 just to survive the hurricanes, although the antenna wind load is 
minimal.
 To include torque arms or not, that is the question. (for tower without ham 
 rotator).  Will the oscillations be reduced by the torque arms?
 Dale - N3BNA
 
 _______________________________________________
 
 
 
 _______________________________________________
 TowerTalk mailing list
 TowerTalk@contesting.com
 http://lists.contesting.com/mailman/listinfo/towertalk
 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>