Towertalk
[Top] [All Lists]

Re: [TowerTalk] Very old DX Engineering Stack match info wanted

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Very old DX Engineering Stack match info wanted
From: "john@kk9a.com" <john@kk9a.com>
Date: Tue, 15 Nov 2016 11:08:15 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Those Yagi Phase Boxes were made by N0XX. I used them for years without
issue. I probably still have a couple in my junk box.  If I remember
correctly you use 1/4 WL 75 ohm coax for the phase lines.

John KK9A


To:     <towertalk@contesting.com>
Subject:        [TowerTalk] Very old DX Engineering Stack match info wanted
From:   "Mike Smith VE9AA" <ve9aa@nbnet.nb.ca>
Date:   Tue, 15 Nov 2016 10:55:27 -0400


I have a very old DX Engineering Yagi Stacking control box I am trying to
find some info on.  I think it's late 80's/early 90's vintage.

I believe it was acquired from a W7 6m Dxer friend back in the mid 90's.
(but it was already somewhat old then).  I don't know the history of DX
Engineering, but did it once reside on the west coast by different folks>?



The grey faced, black cabinet control box has a rotary switch for settings
UPPER/LOWER/STACK (with matching LED's) and a simple on/off toggle.

I am nearly certain it uses only 3 wires for control, though the terminal
strip has more than 3 connections.



I used it on my 6m stack before I moved to my current location in 2004, so I
don't recall what's needed at the tower end for phasing/matching coax
cables.

Ie: Is it 50Ohm? 75Ohm? 1/2wl? 1/4wl?  Which connections?  I have to redo
the remote part as I took it out of service due to a faulty relay or
connections, best as I recall (Hey, I don't throw much away, hi)



IIRC I might have had another remote switch to put them both out of phase,
but don't know where that is.  I don't see anything in the box to be able to
do that, so I presume I did it with an external remote switch added to this
to perform that function. (as an aside, I seldom used BOP..wouldn't waste my
time if I ever stack 2m 6m yagis again, hi!)



***Anyways, my intention is to now reuse this to perhaps phase 2 verticals
for a BS/EF or 2 other directions array.



I was thinking 2 x 1/4WL verticals, spaced 1/2wl apart, with a parasitic
reflector between them, giving me (perhaps_ NE, SW and one other dual
direction pattern , depending on what I can do with a phasing line.



Haven't decided on the band yet..maybe 10m or one of the WARC bands.



TNX,



Mike VE9AA







Mike, Coreen & Corey

Keswick Ridge, NB

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>