Update: I don't know how I missed this before but I finally found a very
similar unit that was for sale some years back in w7.
http://www.eham.net/classifieds/detail/330437
I see by the sale ad it needs 2 x 1/4wl 75Ohm matching sections of coax.
Mine does not have the rotary knob numbered 1-2-3-4, nor do I think the
remote part has an N-connector for input (I have to dig it out of the shed
to be 100% certain)
*(I am not sure what the 4th position would even be for?)
So, any ideas how I can use this to phase 2 verticals to give me perhaps 3
different patterns ?
Anybody even seen or used one of these before?
TNX
Mike
Mike, Coreen & Corey
Keswick Ridge, NB
From: Mike Smith VE9AA [mailto:ve9aa@nbnet.nb.ca]
Sent: November 15, 2016 10:55 AM
To: 'towertalk@contesting.com'
Subject: Very old DX Engineering Stack match info wanted
I have a very old DX Engineering Yagi Stacking control box I am trying to
find some info on. I think it's late 80's/early 90's vintage.
I believe it was acquired from a W7 6m Dxer friend back in the mid 90's.
(but it was already somewhat old then). I don't know the history of DX
Engineering, but did it once reside on the west coast by different folks>?
The grey faced, black cabinet control box has a rotary switch for settings
UPPER/LOWER/STACK (with matching LED's) and a simple on/off toggle.
I am nearly certain it uses only 3 wires for control, though the terminal
strip has more than 3 connections.
I used it on my 6m stack before I moved to my current location in 2004, so I
don't recall what's needed at the tower end for phasing/matching coax
cables.
Ie: Is it 50Ohm? 75Ohm? 1/2wl? 1/4wl? Which connections? I have to redo
the remote part as I took it out of service due to a faulty relay or
connections, best as I recall (Hey, I don't throw much away, hi)
IIRC I might have had another remote switch to put them both out of phase,
but don't know where that is. I don't see anything in the box to be able to
do that, so I presume I did it with an external remote switch added to this
to perform that function. (as an aside, I seldom used BOP..wouldn't waste my
time if I ever stack 2m 6m yagis again, hi!)
***Anyways, my intention is to now reuse this to perhaps phase 2 verticals
for a BS/EF or 2 other directions array.
I was thinking 2 x 1/4WL verticals, spaced 1/2wl apart, with a parasitic
reflector between them, giving me (perhaps_ NE, SW and one other dual
direction pattern , depending on what I can do with a phasing line.
Haven't decided on the band yet..maybe 10m or one of the WARC bands.
TNX,
Mike VE9AA
Mike, Coreen & Corey
Keswick Ridge, NB
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|