Towertalk
[Top] [All Lists]

Re: [TowerTalk] RG-304 for CMC ?

To: towertalk@contesting.com
Subject: Re: [TowerTalk] RG-304 for CMC ?
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Sun, 24 Apr 2016 10:11:15 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On Sun,4/24/2016 10:03 AM, Jim Thomson wrote:
Never heard of silver plated steel being used b4.

That would be fine above about 10 MHz, but steel coated with anything greatly increases conductor resistance below a few MHz as compared with solid copper. You can see this in Belden's published data for their cables.

73, Jim K9YC
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>