Towertalk
[Top] [All Lists]

Re: [TowerTalk] RG-304 for CMC ?

To: "'Jim Thomson'" <jim.thom@telus.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] RG-304 for CMC ?
From: "Peter Voelpel" <dj7ww@t-online.de>
Date: Sun, 24 Apr 2016 19:11:16 +0200
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
RG-142 inner conductor is also plated steel as all that of SAT coax is.

Sheet diameter of RG-304 is 7.1mm.

73
Peter

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Jim
Thomson
Sent: Sonntag, 24. April 2016 19:04
To: Peter Voelpel; towertalk@contesting.com
Subject: Re: [TowerTalk] RG-304 for CMC ?

##  It looks like  304  is .280 OD.... which Im  sure is bigger than 8X 
(.249)
It appears the center conductor on 304 is 1.5mm  = .059 inch  =  14.5  gauge

wire.
The center conductor consist of silver plated steel !    Solid too, not 
stranded.
Never heard of silver plated steel being used b4.

Jim  VE7RF


-----Original Message----- 
From: Peter Voelpel
Sent: Sunday, April 24, 2016 9:46 AM
To: 'Jim Thomson' ; towertalk@contesting.com
Subject: RE: [TowerTalk] RG-304 for CMC ?

Its much smaller then RG-8X, but a little larger then RG-142.


http://www.caledonian-cables.co.uk/Coaxia_Cable/M17_RG/RG304.html
73
Peter, DJ7WW





-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Jim
Thomson
Sent: Sonntag, 24. April 2016 18:36
To: towertalk@contesting.com
Subject: [TowerTalk] RG-304 for CMC ?

Does anybody know anything about  RG-304 ?    Its  aprx  .271 OD.... and has
teflon  + silver braids /center conductor.
Im having a helluva time trying to find out what gauge the center conductor
is.  Does anybody know ?
I think  304  is  sorta the teflon version of  RG-8X, and aprx the same  OD.


If you can wind RG-58  and  also possibly  RG-8X  onto a stack of torroids,
then there should be no issue using RG-304.

IF  304  has a bigger center conductor than  303 /400 coax, then it might be
an excellent candidate for applications
where a high powered CMC is required.     RG-393 is .392 OD.... slightly
less than the .405  found on 213-U.

I'm looking for a possible alternative to 393,  but cant find any V rating,
power ratings  or attenuation charts for 1-54 mhz...for  304 coax.

I have also looked at some of the plenum rated small coax, but the price is
sky high...and difficult to locate in small  qty.

Jim   VE7RF
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>