Hi Bill,
What is are the problems with the meter? Also, the board in my Ham
IV controller only has 2 diodes.
Bill W6RGS
At 02:56 PM 3/3/2016, Bill Feissner wrote:
I have problems with the meter on my ham 4. The schematic in the
manual and on the Hy-Gain website leaves a little to be desired. My
meter circuit pc board has 5 total diodes on it. CR1 and VR1 are
defined as to what they are. The 3 diodes on the top of the board
are not shown on the schematic or say anywhere what they are. I
believe they are IN4008's. Can anyone verify if I am right or not. I
wrote to Hy-Gain and got a hand drawing added on the original
schematic but it only added 2 diodes and never labeled what they
were. They need to update their schematic. Any help is appreciated.
Thanks.
Bill AI3Q
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|