Towertalk
[Top] [All Lists]

Re: [TowerTalk] Oil For Dummy Load

To: "towertalk@contesting.com" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Oil For Dummy Load
From: Bryan Swadener via TowerTalk <towertalk@contesting.com>
Reply-to: Bryan Swadener <bswadener@yahoo.com>
Date: Mon, 30 Nov 2015 02:02:51 +0000 (UTC)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
No, especially when you're pumping a kilowatt into a 90W-rated Globar in only a 
gallon of media that has only the tin bucket itself to transfer the heat to 
atmosphere. You need _every bit of advantage_ you can get.  As it is, those DLs 
are rated a kilowatt for only a few seconds. That's why I stopped using my HN31 
with an amplifier, and built my compact 1500W (100% D/C) load.

Bryan WA7PRC



From: D. Scott MacKenzie
To: Bryan WA7PRC
Sent: Sunday, November 29, 2015 5:42 PM
Subject: RE: [TowerTalk] Oil For Dummy Load

Mineral oil is a proper substitute - and not "dubious."


-----Original Message-----
From: Bryan WA7PRC

Sent: Sunday, November 29, 2015 8:27 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Oil For Dummy Load

I found one gallon of actual transformer oil for FREE (unless you count having 
to drive 2 miles to get it).Why mess around with dubious substitutes when it's 
available for FREE?
Bryan WA7PRC

   
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>