Towertalk
[Top] [All Lists]

Re: [TowerTalk] Looking for good source of 20 ft mast

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] Looking for good source of 20 ft mast
From: <john@kk9a.com>
Date: Mon, 14 Sep 2015 18:10:41 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
That is probably a difficult wall thickness to find and you may have to go
to solid 4130 if you insist on using that diameter and need that much
strength. 3" mast is stronger per pound and so much nicer to climb and clamp
to.  I have not used a 2" mast in decades.

John KK9A


To:     "towertalk@contesting.com" <towertalk@contesting.com>
Subject:        [TowerTalk] Looking for good source of 20 ft mast
From:   Stephen Davis <sdavis@davisrf.com>
Date:   Mon, 14 Sep 2015 13:33:37 -0400
List-post:      <towertalk@contesting.com">mailto:towertalk@contesting.com>
Hello all

Specs :   20 ft. 2" O.D. .50" wall chrome moly

Yep, .5 "  !

Tnx a lot.  73. Steve. K1PEK

Steve Davis
Senior RF Cable Design Engr.
& Founder
DAVIS RF Co. a  division of
Orion Wire Co., Inc.
Tel: 978-369-1738
     ALSO: Davis Rope & Cable             Assembly Co., LLC:
      Design Engrs, Distribution

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>