Re: [TowerTalk] Identifying Teflon Cable

["Richard (Rick) Karlquist" <richard@karlquist.com>]

On 9/11/2015 1:24 PM, Jim Brown wrote:

> Which is a terrible choke, because the Q of #61 material is far too high.
> 73, Jim K9YC
> _______________________________________________

There is a tradeoff regarding power handling.  61 material will have
far less heating than, for example, 43, or 31.  Depending on what
you are trying to do, 61 might make sense.  I use it in my
50 ohm to 450 ohm bal-bal transformer.

Rick N6RK
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk