Towertalk
[Top] [All Lists]

Re: [TowerTalk] [CQ-Contest] Coax Stubs for SO2R

To: "'Mike Smith VE9AA'" <ve9aa@nbnet.nb.ca>, <towertalk@contesting.com>, <cq-contest@contesting.com>
Subject: Re: [TowerTalk] [CQ-Contest] Coax Stubs for SO2R
From: "Bill Hider" <n3rr@erols.com>
Date: Tue, 8 Sep 2015 22:09:55 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Mike, quick comment on harmonic "tone".

I have heard many hundreds of times my CW harmonics on my receivers.
The tone is often buzzy, raspy, and/or otherwise distorted. Sometimes it's
pure.
If I were you, ignore the tone.  That's not the problem.
Take a break.  Let us know when we can help again.

73,

Bill N3RR

-----Original Message-----
From: CQ-Contest [mailto:cq-contest-bounces@contesting.com] On Behalf Of
Mike Smith VE9AA
Sent: Tuesday, September 08, 2015 8:05 PM
To: 'Bill Hider'; towertalk@contesting.com; cq-contest@contesting.com
Subject: Re: [CQ-Contest] Coax Stubs for SO2R

Hi Bill & many others, Kimo, Dave, Jim,  Peter, Gary, Gerry....I've
forgotten a few.

You are all very helpful and I am trying to wrap my head around this.

I think I have to start from scratch and remove everything from in line from
the transmitter. \

I did measure with the T in line and also the coax switches (I say switches
as one is a coax switch, and one is Teed off to potentially just switch
stubs) Tonight I took all that switching out of line and no change. (knowing
full well my stub is no longer perfectly resonant as I lost perhaps 4" of
extra line when I removed the T and the stub-switch, but I still should've
been in the ballpark) No change.

I can't help but wonder by what some of you are saying that I am getting
rectification or bleedthrough inside the shack itself somehow.

I don't have time tonight to try anything more.  Been at it ~4 hours and
have other stuff to do now.

Wednesday or Thursday I am going to connect the transmitter directly to the
antenna (remove amps, switches, tuners, etc. and try again.) (my receiver,
or radio B in my SO2R setup is already direct to a multiband dipole)

On harmonics...should they sound more or less pure, or no? (or is that like
a "how long is a piece of string" type of question ?) Mind are pretty much
bang on frequency but real growly....not pure at all. (either on the IC-7410
or IC-746)......

One time I recorded VE9HF some 8-10kms away running QRO on 14MHz and his 10m
harmonic was a pure signal.   He even had some callers on 10m !

Dit dit & tnx agn.  Very much appreciate the great help !

Mike VE9AA ;-D

Mike, Coreen & Corey
Keswick Ridge, NB


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>