Many years ago I bought a couple for four bolt flange 2" bearings with a
grease fitting from US Towers, perhaps they still sell them. I have also
purchased a 3" four bolt mast bearing from Berry Bearing. They should be
easy to find.
John KK9A
To: "towertalk@contesting.com" <towertalk@contesting.com>
Subject: [TowerTalk] Replacement Thrust Bearing
From: Robert Harmon <k6uj@pacbell.net>
Date: Fri, 17 Apr 2015 09:49:36 -0700
I am overhauling my rotator and thought it would be good to replace my thrust
bearing also.
I have the Rohn TB3 bearing now. It has been in use for 18 years and feels
pretty rough.
Im thinking of going with a different bearing this time with a steel body and
greased. (grease fitting)
Looked thru the archives on tower talk to find out what others have used and
can?t find much,
on this type of replacement and I know the bearing supply houses have them,
just haven?t
pursued searching with them yet. I would like to know what others have
used.
If you have used a thrust bearing like this, could you share
the number and supplier ? Array Solutions has their model TB2 which is this
type
of bearing but it only has a two hole flange for mounting. They have a
larger
unit with a 4 hole
flange but it is for a larger diameter mast than 2 inch. I want a 4 hole
flange
but for 2 inch.
Here is the info from their webpage:
https://www.arraysolutions.com/Products/thrustbearing.htm
Anyway, what say you ?
thanks,
Bob
K6UJ
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|