> Over the years I have heard stories of unexplained failures with Mosley
antennas which were equally unexplained as having to do with the selection
of certain coax cables. One recent incident was with a local here that had
trouble getting a PRO 67 to ?cooperate? only with the use of RG 213 cable.
A Mosley PRO series? My condolences.
My experience has been that the PRO Mosleys are very sensitive to
anything near them. This includes 2M verticals, etc. And you have to have the
exact feed arrangement that they show. Both will cause problems.
Test the antenna with an analyzer at the feedpoint and work your way
back to the shack from there.
Cheers,
Steve K7LXC
TOWER TECH
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|