Towertalk
[Top] [All Lists]

Re: [TowerTalk] Hygain Antennas to OWA

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Hygain Antennas to OWA
From: "john@kk9a.com" <john@kk9a.com>
Date: Tue, 17 Feb 2015 11:12:31 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
So you want to take a Hy-Gain antenna throw away the boom, element
brackets and matching then fabricate a new boom and element brackets? 
What is the point? In my opinion the element tips are very weak. I think
it is easier to start from scratch but if you really want to use the
Hy-Gain elements it is easy to adjust the taper of an existing design
using the W6QHS algorithm.

John KK9A


To:     towertalk@contesting.com
Subject:        [TowerTalk] Hygain Antennas to OWA
From:   Ws9v <ws9v@royell.net>
Date:   Mon, 16 Feb 2015 13:49:56 -0600


Hi

I wonder if anyone has modeled a owa antenna using the existing element taper
an diameters from  the Hygain series 105,155,205 antennas

I have several of these I would like to make them into owa design for the
bandwidth by eliminating the mast to element bracket   insulating the element
and inserting an appropriate size piece of tubing inplace of the element to
boom bracket an adjust the spacing    I do plan to update the booms to
48ft an
3inch od for the 3 higher band antennas    Has anyone every considered this
Im not real sure where to look on the net  There is not much out there

de WS9V Skip

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>