On 8/1/14, 8:06 AM, Steve Hunt wrote:
One small correction to what Jim said:
If the voltage for a given power under matched conditions is V, the
maximum voltage with an SWR of 2:1 will be 1.414*V, not 2*V.
Same for current: 1.414*I
Steve G3TXQ
yes.. Too early in the morning.. at 2:1 VSWR, the max/min is 2:1, but in
that case the min is lower than the matched voltage and the max is
higher than the matched voltage.
I'm used to thinking about worst case mismatch (e.g. a shorted waveguide
or transmission line).
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|