Be careful of chain wrenches! The pivot point of the leverage arm can punch
thru 1/8" wall tubing easily if a really tight fit. Soak for days with PB
blaster or Kroil before the heavy artillery.
Mike, K4EAR
> -----Original Message-----
> From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
> K7LXC@aol.com
> Sent: Sunday, April 13, 2014 3:07 PM
> To: georgeK5KG@aol.com; towertalk@contesting.com
> Subject: Re: [TowerTalk] How to disassemble a boom?
>
> Hiya, George --
>
> Long time no see. How're you doing?
>
> You'll get lots of answers so here are a couple. Heat one piece of
the boom
> and freeze the other piece. Use some Liquid Wrench liberally.
>
> I've found that a chain wrench is REAL handy when dealing with round
> objects like booms and masts.
>
> Cheers,
> Steve K7LXC
> TOWER TECH -
> Professional tower services for amateurs
> Cell: 206-890-4188
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|