Re: [TowerTalk] Measuring Ferrite

["Richard (Rick) Karlquist" <richard@karlquist.com>]

On 4/12/2014 3:20 PM, Jim Brown wrote:
> That's a great idea, Rick -- if you have access to a test rig with
> sufficiently low stray to get accurate data at that frequency and at
> that impedance.
The stray problem can be alleviated somewhat by using just one
turn, since you are just trying to identify the material.
With one turn, the impedance will be minimized.

Rick N6RK
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk