Towertalk
[Top] [All Lists]

Re: [TowerTalk] LMR 400

To: Towertalk@contesting.com
Subject: Re: [TowerTalk] LMR 400
From: Joe <wd0m@wd0m.com>
Reply-to: wd0m@wd0m.com
Date: Sun, 16 Mar 2014 11:58:00 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I too have been using Jefa-Tech LMR400 for about 10 years with no issues at all. My coax/control cables are exposed on the ground, not buried, and the UV at 7500 feet in the mountains of southwest Colorado is pretty intense. No affiliation with Jefa-Tech other than a satisfied user.

73

Joe
WDØM


On 3/16/2014 11:28 AM, Cqtestk4xs@aol.com wrote:
A word about LMR 400...
I have bought regular LMR 400 from several companies (Times, etc.) and
have not been disappointed in any of the cable.
For the past almost ten years I have been buying from JEFA-tech. I have
had no failures...cracks etc.  I've used it for  phasing harnesses for my
stacks as well as the feedlines from the bases of the  towers.  It has stood up
to KH6 and FL sun.
Price per 1000 ft roll is $399. Smaller rolls are available at slighly
higher prices.
One last note..... I did buy the flexi LMR 400 for jumpers on the
antennas from Times back around 2000 and within a couple of years the stuff  
began
to crack like cheap coax.  Changing out jumpers on 14 antenna up in  the air
is not my favorite thing to do.  I will never buy flexi LMR 400  from Times
again.
I have no interest in the company other than being a satisfied customer. K4XS


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>