Roger, Your UV is not nearly the intensity of the 5000 ft high desert 
QTH. What works for you will not work with the intense UV of the high 
desert.
Ray, I think the dripline is something to consider. I think it should 
be much more survivable than typical water hoses which the UV eats 
quickly. I have had HD clear plastic tubing turn to sticky goo in 
under a year. I have used some 1/2 and 3/4 inch black plastic tubing 
in drip systems and it lasted with no apparent damage for several 
years. The black plastic wire covering "tubing" (wire loom) with a 
slit on one side lasts for several years.  I always found it necessary 
to put some tape around it every so often or to use a few distributed 
tie wraps to keep the enclosed wires from popping out when the bundle 
was flexed. Maybe you could ferret out the mfg and buy it in longer 
lengths that the shorter ones at the auto parts store.
Patrick AF5CK
-----Original Message----- From: Roger (K8RI) on TT
Sent: Saturday, November 16, 2013 2:27 AM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Bundling of tower coax and control lines
On 11/16/2013 2:51 AM, Ray Benny wrote:
The subject of bundling tower coax with a spiral/twist type material was
recently mentioned. I cannot seem to find it.
I would like to bundle my coax and other cables, hanging from coax 
arms, to
protect them from UV rays. My QTH is high desert, almost 5000 ft 
elevation
and control lines on other towers are starting to be affected. I used 
non
UV resistant cables that I had on hand at the time,
My Opinion:
Because of the cost and work involved, I'd choose to just replace the
cables.
There are very few coax cables and rotator cables that are very
sensitive to UV.
The only brand name coax sensitive to UV "that I know of" are the
UltraFlex versions of the LMR series.
I do have "old" rotator cables that the outer jacket is failing after
nearly 30 years.
If the cables have been up long enough to already show substantial
deterioration, it's time to replace them anyway.
73
Roger (K8RI)
Does anyone have leads to locate some of this UV resistant material? 
I've
seen this type of material for indoor cables, in 6 - 8 ft lengths. I'm
hoping someone makes long lengths, 50 ft or so and of different 
diameters.
Just a thought, has anyone successfully used large diameter black water
drip line for this? Seems to cover 2 RG8 size coax cables, a #12/2 
copper
line and a 3/8" control line would require at least a 1" diameter line.
Tnx,
Ray, N6VR
Chino Valley, AZ
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk