Towertalk
[Top] [All Lists]

Re: [TowerTalk] minimum guy radius

To: towertalk@contesting.com
Subject: Re: [TowerTalk] minimum guy radius
From: Jim Lux <jimlux@earthlink.net>
Date: Thu, 31 Oct 2013 10:52:31 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On 10/31/13 9:47 AM, Roger (K8RI) on TT wrote:
On 10/31/2013 9:25 AM, Steve Maki wrote:
A guyed tower can be designed for closer guying than that, no problem.
Takes more steel, bigger guys, bigger anchors, and careful engineering.

There's a 1000' TV tower near me with outer anchors at around 350'. The
wires are 3", and the tower is massive.

There's a lot of variables that can't be seen.  The only spot available
for a self supporting cell tower in town was the corner of a parking lot
so they went 30 feet deep with the foundation.  "The odds are" if this
is a commercial tower, they had to meet engineering standards.  Course
every once in a while we read about something really expensive, folding up.



The collapse of the pyramid at Meidum triggered a design change in all subsequent pyramids, and a change in one undergoing construction (Bent Pyramid at Dashur).. oops better pick a more gentle angle..


These things happen.  Always have, always will.

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>