Towertalk
[Top] [All Lists]

Re: [TowerTalk] New Sheaves for Crank-Up

To: <n0tt1@juno.com>,n3ae@comcast.net,TowerTalk@contesting.com
Subject: Re: [TowerTalk] New Sheaves for Crank-Up
From: "Anthony W. DePrato" <wa4jqs@mikrotec.com>
Date: Sun, 25 Aug 2013 09:48:42 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>


I have a old EZ-way tower (RBX-50) and NO WAY would I
use any kind of plastic/nylon pulley on that lift system!!!

73,
Charlie, N0TT

Charlie is correct . i have a 40 foot pole the power company installed a few years back when they put in the drop . they installed the drop going under my extented 70 ft tower with a 4 ele quad.. when i got home i was amazed they had done this.. could not crank the tower down. called the power company they set a new pole and moved the drop. but left the old pole. told me i could have it.. well i am looking at putting barn door track up one side and a wench on the other. and putting my spare CL-36 on it. finding a saddle type pulley has been a problem to go on top of the pole. i think i have found a good one at grangers. that will bolt to the top of the pole but i will have to make a cable keeper to go over the top so the cable will not come out if slack gets into in some how. they also have a small 4 pulley trolley assmy that will ride in the barn door track. and will mount to a mast plate for the rotor.. now to find some heavy duty barn door track in the area ..

73 Tony


Anthony W.  DePrato WA4JQS
Since Sept 9th 1962
ARRL CDXC WIA  FISTS  A1OP
CQ DX HALL OF FAME # 39
DXCC HONOR ROLL
FOUNDER SOUTH SANDWICH ISLAND DX GROUP 1988
CALLS HELD
VP8BZL VP8SSI 3Y0PI ZD8JQS V31SS WA4JQS/ZS1 WA4JQS/KC4 WA4JQS/4K1
ZUT DE WA4JQS

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>