Towertalk
[Top] [All Lists]

Re: [TowerTalk] Crankup Danger

To: "Bryan Swadener" <bswadener@yahoo.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Crankup Danger
From: "Patrick Greenlee" <patrick_g@windstream.net>
Date: Fri, 2 Aug 2013 08:53:49 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Thanks for your response.

In my situation I have no zoning concerns, no inspections, no home owners 
association, or such.  I am subject to FAA concerns if the tower is tall enough 
(red and white alternating paint and lights.)  I do have neighbors but the 
nearest are 1/4 mile away and not in the “kill zone” of anything I would put 
up. I have a small black Angus cattle ranch (cow-calf operation) on 160 acres 
so I can get pretty wild with sky wire and such if I want.

Patrick AF5CK

From: Bryan Swadener 
Sent: Thursday, August 01, 2013 7:12 PM
To: towertalk@contesting.com 
Cc: patrick_g@windstream.net 
Subject: Re: Crankup Danger

Patrick,

Yes and yes. I installed a 3-section 72 foot tower (US Tower TX472)
last July with the optional tiltover fixture. The tower manufacturer
clearly states that thou shalt not climb ye olde tower. In fact, with
motorized drive, I can have the tower up/down a lot faster than
I can climb it. Having it down and tilted over also means not having
to be concerned that I have all the parts and tools before climbing it.

My concern is the condition of your tower (mine came to me in perfect
shape) and the modifications to it.  If you are required to have a permit,
your zoning and permitting agency may require wet-stamped plans for
your particular installation, from a Professional Structural Engineer who
is licensed in your state.  My county building department required it for
any tower structure over 35 feet tall that is not part of an existing structure.
I hired Hank, KR7X and he supplied me with everything I needed.  I
suggest you look into the permitting requirements BEFORE investing
a lot of time/effort/money into your tower.

vy 73,
Bryan WA7PRC

Date: Thu, 1 Aug 2013 13:45:07 -0500
From: Patrick AF5CK
Subject: Re: [TowerTalk] Crankup Danger

Wouldn't you ordinarily lower a crank-up tower before climbing? If it were a 
tilt over as well wouldn't you tilt it over instead of climbing it?

Patrick AF5CK

-----Original Message----- 
From: Wilson
Sent: Thursday, August 01, 2013 1:22 PM
Subject: [TowerTalk] Crankup Danger

Well, if the tower should telescope while you are on it, the shearing off of
fingers and the front of your feet might be considered an undesirable
possibility.
If you are on an upper section when the collapse occurs, you might get by
with just some foot damage and being thrown to the ground as the section you
are on drops into the next one down...
Your plan is much like the old EZWay towers.  There's a book for the two
section 40 footer on BAMA.      http://bama.edebris.com/manuals/ezway/rbs40
WL
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>