Those would have worked with the TH7, but at the time of mounting the TH7 I
had no stock of FT240-61.
The balun on my TH7 was a coax choke wound on a large 4C65 (~61 mix) Toroid:
http://m0.i.pbase.com/g2/91/283791/2/149766070.bPdNQt46.jpg
73
Peter
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Jim
W7RY
Sent: Mittwoch, 24. Juli 2013 04:15
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Which Balun with the TH7DXX
The 2.4 inch 61 core is part number 5961003821.
I use them for stack match transformers from time time or for small baluns
wound with RG142.
13 turns of RG142 on a single core give me 30uH, same as my solenoid chokes.
73
Peter
You use these for Hy-Gain TH7 antennas?
73
Jim W7RY
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|