I installed a run of BuryFlex recently and was surprised at how flexible
and slippery it is. I pulled it through 160' of 2" PVC conduit with about
five 90-degree bends and it ran through easily with no lubrication.
Two thumbs up.
On Thu, May 2, 2013 at 9:27 PM, Marvin Shelton <wa2bfw@att.net> wrote:
> I don't know if I've ever seen anyone here make mention of the fact that
> you should NOT attach ANY coax cable to the stand-off arms of a crank up
> tower regardless of how "flexible" it is. I just learned this the hard way.
> I read about someone somewhere saying that they had attached the coax
> coming thru the standoffs to the standoffs themselves so that the coax
> would not lie on the ground when the tower was cranked down. While this
> helps keep the coax off the ground, it can cause flexible coax, in my case
> Belden 9913F7 (recommended by Texas Tower) to take too sharp of a bend,
> when the weight of the coax above the standoff comes into play.
> It took me awhile to figure out what was wrong so I thought I'd pass the
> word along here, as many on this reflector have helped me in the past.
> So my suggestion is to get a tub or some type of container on the ground
> to receive the coax as you crank your tower down and let the coax slide
> thru the standoffs. The fewer bends you put into coax the better.
>
> Finally, I thought I saw somewhere in QST or elsewhere, a description of
> what coax brands use soft foam center dielectrics. I think this is the case
> with the Belden 9913F7 and I want to know what other cables could be
> subject to this problem so that I stay away from them.
>
> The tower now has a run of RG-213 and one of LMR-400 both without problems.
>
> 73's from Marv
> wa2bfw@att.net
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|