Re: [TowerTalk] misaligned vertical towers

[David Gilbert <xdavid@cis-broadband.com>]

I truly do not see the quandary here.   You don't need a plumb bob 
hanging off the tower ... just hold a plumb bob out in front of you as 
high as you can hold it and line the string up with the towers one at a 
time from various vantage points.
Dave   AB7E



> -----Original Message-----
> From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Steve
> K7AWB
> Sent: Thursday, March 21, 2013 3:00 PM
> To:towertalk@contesting.com
> Subject: [TowerTalk] misaligned vertical towers
>
>
> I have two towers up.  A 90 foot Rohn 45 with a 6-el 20 meter beam on it and
> a 102 foot Rohn 25 without anything on it yet.  Both are guyed.  In putting
> them up, a group of us used a Loos tension meter and our eyesight at the
> bottom of each tower to make them vertical.
>
> But when I look and align the two towers next to each other by walking
> around until they are "next" to each other, one or both are off vertically
> with respect to each other.
>
> How do I figure which is straight and which is off or maybe both are slight
> off?
> I really don't want to climb them now in the bad weather and drop a plumb
> bob and do not have a survey level.  They are really 135 feet apart.
>
> 73
> Steve Sala
> K7AWB
> DN17es
> Nine Mile Falls, WA
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk