I was hoping to get some advice regarding "right sizing" a rotator to use
with a 6 band hex beam. I don't want to get carried away with a monster
rotator (waste of $) nor do I want to err on the side of too puny and not
have it last or become a maint prone nightmare.
It will be installed with the antenna base mount about 40 ft above ground
but could conceivably be mounted higher when/if I realize my maniacal desire
to have a taller automatic crank-up/tilt-over free standing tower. More wind
to deal with but in theory the wind load of the hex is symmetrical and won't
present much torque to the rotator.
What about the (possible urban myth) idea that a HD TV antenna rotator is
all you need for a hex?
TIA for your thopughts.
73 Patrick AF5CK
-----Original Message-----
From: Jorge Diez - CX6VM
Sent: Wednesday, January 16, 2013 1:26 PM
To: towertalk@contesting.com
Subject: [TowerTalk] HFTA and 15 mts stack
Hello
Wich is the ideal space between two 15 mts monobanders on 44ft boom?
HFTA tell me that 36/30 mts is better than 36/18 mts or 36/20 mts but I
think 6 mts space between the two antennas is too close.
73,
Jorge
CX6VM/CW5W
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|