All of my Phillystran cables connect directly to the tower brackets with
either Big Grips or Spelter Sockets. You can use a shackle for easy
removal if you wish. For the connection between Phillystran and EHS, I
just use back to back thimbles.
BTW, if you have a tower twisting issue, star guying is much more
effective than torque arms.
John KK9A
To: towertalk@contesting.com
Subject: [TowerTalk] Phillystran Guys
From: Tom Harke <tom@tomharke.com>
Date: Mon, 20 Aug 2012 10:17:43 -0500
I am in the process of preparing the guys for my latest tower project. I
am looking for recommendations on attaching the Phillystran guys to the
tower torque arms. I can shackle the guy directly to the torque arm or
use a approx 5-6 feet of 1/4" EHS with Big Grips attached to the torque
arms and then shackle to Philly to the 1/4" EHS.
I would appreciate any input on which would be the best way to do this.
Thanks
Tom AA9A
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|