I used the special big grips for Phillystran and then connected the big grip
directly to the tower torque arm using shackles
73 Mark N1UK
----- Original Message -----
From: "Tom Harke" <tom@tomharke.com>
To: <towertalk@contesting.com>
Sent: Monday, 20 August, 2012 11:17 AM
Subject: [TowerTalk] Phillystran Guys
>I am in the process of preparing the guys for my latest tower project. I
> am looking for recommendations on attaching the Phillystran guys to the
> tower torque arms. I can shackle the guy directly to the torque arm or
> use a approx 5-6 feet of 1/4" EHS with Big Grips attached to the torque
> arms and then shackle to Philly to the 1/4" EHS.
> I would appreciate any input on which would be the best way to do this.
>
> Thanks
>
> Tom AA9A
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|