The drag-racer neighbor who fabricated mine used a scrap piece of
high-density polyethylene, which looks for all the world like a piece of
a kitchen cutting board. Up 10 years so far and working fine. I also
put a piece of split radiator hose on the swing arm for those times when
I bounce it off the tower leg.
73, Pete N4ZR
The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at
reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000 and
arcluster.reversebeacon.net, port 7000
On 1/29/2012 11:14 PM, Jim W7RY wrote:
> Yup! That works too. How did you handle the "bearing" above the rotor? Just
> a short piece of pipe larger than the mast? Most folks don't have a lower
> mast support for their Ham-4 or Tailtwister though.. :)
>
>
>
> 73
> Jim W7RY
>
>
> --------------------------------------------------
> From: "Dick"<dick@ny1e.com>
> Sent: Sunday, January 29, 2012 5:54 PM
> To:<towertalk@contesting.com>
> Subject: [TowerTalk] Swinging Gate Side Mount - Additional Turning Radius?
>
>> I don't like the swinging gate from IIX. Here's why. The mounts only
>> clamps
>> to ONE leg of the tower. You have to tighten the U bolts too tight to get
>> the mount not to turn. This puts way too much pressure onto the leg.
>>
>> I like a design that I found here:
>> http://www.arraysolutions.com/Products/sidemountusersguide1.htm It Uses
>> angle iron to connect to two legs of the tower. There is no possibility of
>> slippage so you don't have to over tighten the U bolts.
>>
>> Array solutions seems to be over engineered for most antennas, My homebrew
>> one is a compromise:
>> http://www.ny1e.com/smount.jpg
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|
