cheaper, simpler, works fine here, but we only had 50" of rain last year....
take handful of duct seal, mold around connectors and over coax, wrap with two
layers of cheap tape just to squeeze it in place and out of the sun. same
removal method, split the tape and pull apart, usually most of the duct seal
sticks to the tape and the connector is relatively clean. i prefer this to
liquid tape or other stuff like that up towers since there is nothing to spill
and no time to wait for drying.
Jan 17, 2012 12:18:49 PM, Cqtestk4xs@aol.com wrote:
Simple, and it worked out on the wet side of the Big Island (KH6) where we
got 190 inches in 2009.
Wrap with good quality electrical tape, coat with liquid tape. Wrap
again, and coat again. Cheap effective and just split the taped connection with
a utility knife when you want to take it apart.
Bill K4XS/KH7XS
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|