This should take care of the problem.
http://www.poolsupplies.com/cgi-bin/commerce.exe?key=108200&preadd=action
Julio, W4HY
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Fred Hurd
Sent: Monday, December 12, 2011 7:12 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Rain Water Getting Into TX-472 Motors
The motor unit installed on my TX-472 US Tower has been soaked internally by
rain water leaking into the motor housing resulting in motor rusting and
corrosion internally. Now the motor is drawing too much current to start up
and blowing the electrical source fuse. Contact with the motor manufacturer
reveals that these motors were not designed to be exposed constantly to
weather but used primarily with generators within weather protected housing.
I am curious if other TX Tower owners have experienced similar problems with
the motors being damaged by rain water. Has anyone found a replacement motor
that can survive heavy rain? Or is the only solution using a cover over the
motor?
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|