I use it on a 70 foot crank up tower, no problems here. I did change out
the crappy cable stand off's to something far better and well made though
because the weight killed the originals in four weeks.
Below are links if you need stand off's or consider the standard ones too
weak, don't know what tower you have but mine is a LM-470.
http://www.eham.net/reviews/detail/8588
http://www.kf7p.com/KF7P/Welcome.html
I think he even has a photo of me testing the strength of the standoff on
his web page: -)
-Mike, K6BR
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of krishna
kanakasapapathi
Sent: Wednesday, October 26, 2011 6:58 PM
To: TowerTalk@contesting.com
Subject: [TowerTalk] Solid center conductor LMR400 for crankup tower?
Howdie folks,
I am installing the DB18 on a 75ft crankup. Have a roll of LMR400, the
solid center conductor type.
I thought i might just ask before i cut the cable from the roll. Any
possible issues with
using the LMR400 on a crankup?
I have arms mounted on each of the 3 sections to keep the cables away
from the telescoping sections.
73s
krish
w4vku
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1834 / Virus Database: 2092/4575 - Release Date: 10/26/11
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|