Towertalk
[Top] [All Lists]

Re: [TowerTalk] Solid center conductor LMR400 for crankup tower?

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Solid center conductor LMR400 for crankup tower?
From: W0MU Mike Fatchett <w0mu@w0mu.com>
Date: Wed, 26 Oct 2011 20:11:44 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I don't think using a solid conductor on crank up is a good idea.  I 
don't believe the cable was designed for those types of applications.

Mike W0MU

J6/W0MU November 21 - December 1 2011 CQ WW DX CW
W0MU-1 CC Cluster w0mu.net


On 10/26/2011 7:58 PM, krishna kanakasapapathi wrote:
> Howdie folks,
>    I am installing the DB18 on a 75ft crankup. Have a roll of LMR400, the
> solid center conductor type.
>    I thought i might just ask before i cut the cable from the roll. Any
> possible issues with
>     using the LMR400 on a crankup?
>
>    I have arms mounted on each of the 3 sections to keep the cables away
> from the telescoping sections.
>
> 73s
> krish
> w4vku
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>