Buy a RigExpert model from VE3DZ. Several to choose from. The one
that cost about 375 is the one I have that doesn't cover UHF.
Guarantee you will be glad you did. Best purchase I have made in a
kong time.
Stan, K5GO
Sent from Stan's IPhone
On Oct 16, 2011, at 1:29 PM, jcowens1@comcast.net wrote:
>
>
> I need an antenna analyzer that provides impedance information. I
> have the predecesor to the MFJ-259B, and have been disappointed in
> it when the frequency of interest is near the band overlap areas of
> the various range segments. Works great mid range in those bands,
> but becomes unreliable near the edges of each band, and the overlap
> is not always sufficient to give reliable readings. I am considering
> the 259B, but fear the same kind of problems.
>
>
>
> Is there another instrument ouit there that isdesigned for ham
> radio, and not terribly expensive that you have experience with and
> feel is better than the 259B? Your response will be apprecaited.
>
>
> John Owens - N7TK
>
> Celebrating over 50 Years in Ham Radio
> No. 1 Honor Roll
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|