This will be a busy summer for me as I have a number of yagis to get up before
the fall season. I don't have alot of experience doing tower work but I did
manage to get most of my AB-105 in the air. I've got 2 towers of about 150
feet each. Now it is time to get the antennas up.
I have a 40M4LLDD and 20M6A to tram up the tower. Also I have a KLM 6 element
15M and also a 6 element 10M. Both towers have 10 ft of mast above the top
section. My plan is to put the 40M beam on one tower 2 ft above the top of
the tower and the 10M beam at the top of that mast. A similar configuration
on the other tower with the 15 over the top of the 20.
I want to do this safely of course with a minimum time committment from the
ground crew. That means good planning up front.
BTW, the towers were engineered and installed properly.
So, my question to the group is how do I do this with minimal pucker factor and
maximum fun. Yeah, and the money is pretty much all spent.
Thanks in advance and 73,
Guy, N7ZG
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|