A wiring diagram is easy - Leeson has them on their web site.
I used the Leeson washdown duty motor - it will last longer outdoors.
Reliably switching the motor requires a hefty switch. I deployed a boat lift
switch that included a momentary drum switch, GFI circuit, weatherproof box and
a stainless plug.
Mickey N4MB
On May 15, 2011, at 10:07 AM, Doug Dietz <dcdietz@chartermi.net> wrote:
> ,
> I listen I learn....
> My tower is a lm354hd it is also used, someone had a motor on it and it has
> been removed. I have all the drawings and the spec of the motor it is a
> lesson 112431 .500 motor. I should also mention that I have the 40:1 gear
> box and the drummer winding the cable is also there. The motor pulley is
> speced at a.625x1.750, and the belts a 4l410 gates 2410, what I don't have is
> the number of the pulley on the gearbox I assume that it is in the drawing of
> the gearbox drum assy I know that it is a 10inch and I can get the shaft size
> off the reducer so I need a number off the 10 inch pulley and a wiring
> diagram. anyone HELP Doug WD8Z dcdietz@chartermi.net
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|