Towertalk
[Top] [All Lists]

Re: [TowerTalk] Joining Phillystran and EHS

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Joining Phillystran and EHS
From: Jan Erik Holm <sm2ekm@telia.com>
Date: Fri, 23 Jul 2010 17:48:51 +0200
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Sorry guys I just found it with Google, looks like
a good way to do it. Forget what I did ask.

73 Jim SM2EKM
------------------
On 2010-07-23 17:28, Jan Erik Holm wrote:
> Is there a picture somewhere how this looks, I don´t know
> what a 502 insulator looks like.
> I have to go this route myself pretty soon, if nothing else
> to use all the Phillystran I once did buy.
> Jim SM2EKM
> -----------------------
> On 2010-07-23 16:57, Tim Duffy K3LR wrote:
>> Hello Mark,
>>
>> I have had good success with a 502 insulator - to make the Phillystran to
>> EHS transition. I think the 502 is a safer route than shackles and thimbles
>> that might cause either preform (Phillystran or EHS sides) to distort over
>> time.
>>
>> 73 and be safe,
>> Tim K3LR
>>
>>
>> -----Original Message-----
>> From: towertalk-bounces@contesting.com
>> [mailto:towertalk-bounces@contesting.com] On Behalf Of Mark Robinson
>> Sent: Friday, July 23, 2010 9:43 AM
>> To: TowerTalk@contesting.com
>> Subject: [TowerTalk] Joining Phillystran and EHS
>>
>> I am getting ready to assemble the top guys on my rohn 45 tower. I intend to
>> use a short length of 1/4ehs at the top and maybe 27 feet of 1/4 ehs at the
>> bottom. I will be using a length of Phillystran HTP667001 in the middle. I
>> will use the PLP2755 big grip on the philly with a 1/2 inch thimble. I will
>> be using a BG2144 big grip on the 1/4 ehs together with a 3/8 thimble. My
>> question is how to join the ehs and the philly together. Can I just use the
>> two thimbles looped inside of each other at the joint or do I need a shackle
>> or maybe a 502 insulator between the two big grips.
>>
>> The shackle would need to be fairly substantial to have a working load near
>> to that of the cable at 6000 pounds. How have other people made this
>> connection?
>>
>>
>> 73 Mark N1UK
>>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>