Towertalk
[Top] [All Lists]

Re: [TowerTalk] best way to shine up an old yagi?

To: <TOWERTALK@contesting.com>
Subject: Re: [TowerTalk] best way to shine up an old yagi?
From: <john@kk9a.com>
Date: Tue, 13 Jul 2010 17:54:30 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
The 6061-T6 DOM that I have purchased had a dull finish.  The 6061-T6 
extruded tubing that I bought was shinier, but not a mirror finish.  Perhaps 
DOM is available in different finishes?

John KK9A



To: towertalk@contesting.com
Subject: Re: [TowerTalk] best way to shine up an old yagi?
From: "Roger (K8RI)" <K8RI-on-TowerTalk@tm.net>
Date: Mon, 12 Jul 2010 23:32:45 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>

On 7/12/2010 6:24 PM, Hector Garcia XE2K wrote:
> This pads are great to clean and leave smooth the surface of any metal 
> pipe or
> tubing
> and are the first thing to use  if you want to make  SHINE the idea is to
> polish
> is how I understand
>
> Force 12 use no polished aluminum to save money , CC use it and the 
> antennas
> shine when New
>
I'm not so sure ... All aluminum I've purchased from the distributor
comes from the mill with a highly reflective surface (inside and out)
from either being drawn or extruded. It's my impression the dies impart
this shiny, mirror like finish. Two weeks ago they delivered 5 24'
lengths of 2" X 1/8" , one with 3/16" wall and three 24' lengths of 1
1/2" with 1/8" wall. All 6061-T6 and all have the appearance of a
polished finish, but they are the standard, from the mill condition.

Normally the dull, non reflective finish comes from aging out in the
weather, bead blasting, or tumbling

73 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>