Here's a 2k version
http://www.northerntool.com/shop/tools/product_200328855_200328855
Chris
KF7P
----- Original Message -----
From: "Tommy Taylor" <W7RV@q.com>
To: "mcelmer1" <mcelmer1@netecin.net>; <towertalk@contesting.com>
Sent: Monday, July 12, 2010 1:38 PM
Subject: Re: [TowerTalk] Harbor Freight WInch
> Mike,
>
> I would look at the 1300 lb rated "Hoist" from Harbor Freight. It uses
> wire rope not chain and is designed for overhead lifting. Several people
in
> the Phoenix area have fixed these to crankup towers and they work very
well.
> They have 4 models of Hoists, but I would go with the highest rated one
> (1300lb). There are 20% percent off coupons for HF all over the place,
> which would make your purchase about $100. They run off 120 VAC. The
SKU
> # is 02954 and you can examine it on their website.
>
> 73/Tommy W7RV
>
> --------------------------------------------------
> From: "mcelmer1" <mcelmer1@netecin.net>
> Sent: Sunday, July 11, 2010 12:04 PM
> To: <towertalk@contesting.com>
> Subject: [TowerTalk] Harbor Freight WInch
>
> > Any thoughts on using a Harbor Freight winch for a U.S. Tower 55 ft
> > crankup??
> >
> > I think the one sold by U.S. Towe is around $1200 versus $150 for the
> > Harbor Freight model.
> >
> > Mike
> > W8TRN
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|